Is your watch dying before the end of your workday, shutting down during workouts, or physically pushing the screen out of the aluminum frame due to a swollen cell? Restore your all-day wrist power with this Standard Replacement Battery. Engineered specifically for the Apple Watch Series 6 (44mm), this dependable Lithium-ion cell is designed to safely restore your wearable's lifespan.

Quality Tier: Standard (Aftermarket Replacement)
This Standard-tier replacement provides a highly cost-effective solution for reviving an aging Apple Watch. Every cell is tested to ensure a 0-cycle count upon installation, delivering stable voltage and safe charging temperatures without the premium cost of a factory-spec cell.

Standout Engineering Features

• Stable Power Delivery: Matches the precise 304 mAh capacity requirements of the Series 6 (44mm) to resolve sudden voltage drops and boot-looping.
• Integrated Safety Protections: Built-in overcharge and short-circuit ICs prevent thermal runaway.
• Pre-Installed Adhesive: Features pre-applied bottom adhesive so the battery sets securely into the casing without shifting or rattling against the Taptic Engine.

Important Installation Note (Screen Removal & Resealing)
To access the battery, you must carefully heat and slice through the highly robust adhesive holding the OLED screen to the frame. Prying too deeply will sever the delicate display flex cables. Opening the Apple Watch permanently destroys the original water-resistant seal. To successfully reassemble and protect your device, you must purchase and install the Display Adhesive Seal for Apple Watch Series 6 44mm.

Diagnostic Note: Unlike the Series 4 and 5, Apple completely removed the Force Touch gasket architecture in the Series 6. You only need the standard display perimeter adhesive to reseal this device. Ensure the inside of the casing is completely free of old adhesive residue and glass fragments before setting the new battery and sealing the display.

Specifications & Compatibility

• Condition: Brand New (0-Cycle)
• Manufacturer Tier: Standard (Aftermarket Component)
• Battery Type: Lithium-ion (Li-ion)
• Capacity: 304 mAh
• Voltage: 3.85V
• Compatibility: Engineered specifically for the Apple Watch Series 6 (44mm).
• Not compatible with: Apple Watch Series 6 (40mm), Series 7, or any other models.

Package Contents

• (1) Standard Replacement Battery (With Pre-Installed Adhesive)
• Note: Display adhesive seals and specialized pry tools are sold separately.