How To Avoid Stripping Tiny Screw Heads
A stripped screw head turns an easy fix into a hard one. These habits help keep heads clean.
Jump To: 🎯 Match The Bit Exactly · ⬇️ Push Down, Then Turn · 🐢 Go Slow · 🔄 Swap Worn Bits · 🧭 Let The Torque Driver Stop You · 🗂️ Keep Screws In Order · 🛒 Shop The RELIFE Drivers · 📚 More In The Tool Use 101 Series · 📅 Rather Leave It To Us?
🎯 Match The Bit Exactly
Use the exact shape and size. A bit that "almost fits" is the top cause of a chewed-up head.
⬇️ Push Down, Then Turn
Keep steady downward pressure and hold the driver straight up and down. Tilting lets the bit ride up and slip out (called cam-out).
🐢 Go Slow
Turn smoothly. Fast, jerky turns slip more easily.
🔄 Swap Worn Bits
A rounded bit tip will round off screws too. Replace it when the edges look dull.
🧭 Let The Torque Driver Stop You
When tightening, a torque-limiting driver stops at a set point so you don't overdo it and damage threads or heads.
🗂️ Keep Screws In Order
Screws come in different lengths. A long screw in a short hole can damage parts underneath, so lay them out in order as they come out.
🛒 Shop The RELIFE Drivers
See the full lineup on our RELIFE torque drivers page or start with the RELIFE RL-724 T1 torque driver.
📚 More In The Tool Use 101 Series
📅 Rather Leave It To Us?
If a screw is already stripped or you would rather not open your phone, Book An Appointment or call (720) 413-8150 and we will take a look.
🔗 Sources
- Apple Self Service Repair (public repair manuals)



