Opening your device to replace a shattered display, degraded battery, or faulty camera inherently destroys the original factory weather seal. Restore your device's internal defense against moisture and debris with this Standard Screen Adhesive Water Seal. Engineered specifically for the Apple iPhone 17 Pro Max, this pre-cut adhesive gasket perfectly matches the internal chassis perimeter for a seamless reassembly.

Quality Tier: Standard (Factory-Spec Acrylic Perimeter Seal)
Never use liquid glues or generic double-sided tape to seal a modern smartphone. This Standard-tier replacement utilizes Factory-Spec acrylic adhesive mounted on a thin PET film. It is precisely milled to the exact micrometer of the iPhone 17 Pro Max's internal titanium lip, ensuring the screen sits perfectly flush with the housing without any raised edges or structural weak points.

Standout Engineering Features

• Precision-Cut Application: Comes pre-applied to a rigid plastic guide film, allowing for perfect drop-in alignment on the device housing without wrinkling or folding the adhesive.
• Dual-Layer Bonding: Features distinct adhesive properties on each side—one optimized for the titanium chassis and the other optimized for the display assembly glass—ensuring maximum hold.
• Environmental Defense: Formulated to restore the baseline barrier against ambient moisture, lint, and dust particles from entering the logic board cavity.

Important Installation Note (Chassis Preparation & IP Rating)
For this adhesive to bond correctly, chassis preparation is critical. You must meticulously scrape away 100% of the old factory adhesive from the titanium frame and clean the channel with high-percentage isopropyl alcohol. If even a microscopic sliver of the old adhesive remains, this new seal will fail to sit flush, leaving a gap for water to enter.

Disclaimer: While this Factory-Spec seal restores environmental protection, no device can be guaranteed perfectly waterproof (IP68) after being opened by a third-party technician. We highly recommend keeping the repaired device away from submersion or heavy liquid exposure.

Specifications & Compatibility

• Condition: Brand New
• Manufacturer Tier: Standard (Aftermarket Component)
• Material: Acrylic Adhesive / PET Carrier Film
• Compatibility: Engineered specifically for the Apple iPhone 17 Pro Max (6.9-inch).
• Not compatible with: Apple iPhone 17, 17 Plus, or 17 Pro models.

Package Contents

• (1) Standard Replacement Screen Adhesive Water Seal
• Note: Isopropyl alcohol, scraping tools, and replacement screen modules are sold separately.