Front Screen Adhesive Seal Compatible with iPhone 17 Pro (2 Pack)

Protect your repair! Whenever you open your device, the factory perimeter seal is stretched and destroyed. Our Front Screen Adhesive Seal Compatible with iPhone 17 Pro (2 Pack) is a required component for putting your phone back together safely. Because applying these thin gaskets can be finicky, we include two seals in every order to give you peace of mind and a backup in case of a mistake. This model-specific, pre-cut adhesive gasket bonds your screen securely to the metal housing, preventing screen lift and helping to keep out everyday dust and moisture.

📊 Specifications & Features

• Quality Tier: Premium Aftermarket. High-tack acrylic adhesive cut to exact OEM dimensions.
• Application: Front Screen / Display Assembly.
• Fixes: Destroyed seals, lifting screens, and compromised dust/moisture barriers following a repair.
• Compatibility: Fully compatible with Apple iPhone 17 Pro.

⚠️ Technical Notice & Handling

🧽 Surface Preparation is Critical: This new adhesive will not bond properly if there is any residue left on the metal frame or the screen bezel. You must use a plastic scraper with a small microfiber cloth and high-percentage isopropyl alcohol (90%+) to scrub away every trace of the old adhesive residue. The frame should be perfectly clean and dry before applying this new seal. If the surface is prepared correctly, the adhesive will not peel away when the protective plastic layers are removed.

💧 Water Resistance & IP-Rating Realities: Breaking the original seal compromises the device's water and dust resistance. Always thoroughly clean the frame and apply this brand-new, model-specific pre-cut adhesive seal before clamping the new screen down. Please note: Factory "IP Ratings" are largely marketing terms based on pristine lab conditions. In the real world, stress on the metal frame from daily use or previous falls causes micro-warping. Because of this, true water resistance can never be 100% guaranteed on any repaired device—keep it away from liquids!

⚙️ Installation Tip: The adhesive comes sandwiched between colored guide films. Peel the tab to separate the layers and align the seal perfectly with the frame's perimeter before pressing it down. Run a spudger lightly along the edges to secure the bond before peeling off the final top protective film guide. Seat the screen and install the brackets and screws before removing the final protective adhesive from the edges.

📦 Package Information

• Contents: (2) Pre-cut Front Screen Adhesive Seals Compatible with iPhone 17 Pro.
• Packaging: Safely sleeved in protective flat packaging to prevent bends or creases during transit.