Restore all-day power and system stability with this Standard XCAP Replacement Battery. If your Apple iPad Pro 11-inch shuts down unexpectedly, drains rapidly, or fails to charge, this Factory-Spec cell delivers the exact voltage and capacity required for intensive daily use.

Quality Tier: Standard (Factory-Spec Lithium-Ion Cell by XCAP)
Avoid the logic board risks associated with unbranded budget batteries. This high-density lithium-ion polymer core is strictly batch-tested to ensure zero previous charge cycles, reliable capacity retention, and thermal stability during heavy workflows.

Standout Engineering Features

• Zero-Cycle Guarantee: 100% brand new internal cells for maximum replacement lifespan.
• Simplified Flex Routing: Unlike previous generations, this model routes the battery flex over the motherboard, significantly streamlining installation.
• Overcharge Protection: Built-in safety micro-circuits automatically cut power to prevent overheating and cell swelling.

Important Installation Note (OLED Screen Removal & Thermal Strategy)
Accessing the battery requires removing the fragile front display. Use extreme caution: do not insert pry tools deeper than 1-2 mm along the screen edges. Inserting tools any further risks severing the delicate display flex cables routed beneath the bezel. While controlled heat and high-concentration isopropyl alcohol are recommended to soften the perimeter adhesive, do not oversaturate the edges with liquid or pull forcefully on the glass, as this will permanently warp or destroy the OLED panel.

Removal & Safety Strategy: The internal battery is secured with high-strength adhesive. Always discharge the old battery below 25% before repair to prevent a thermal event if punctured. If adhesive pull tabs fail, apply controlled heat to the back aluminum chassis (never directly on the screen) at a maximum of 158°F (70°C) for 5 to 8 minutes to safely soften the adhesive. Isopropyl alcohol (90%+) can also be used beneath the cells to dissolve remaining adhesive.

Specifications & Compatibility

• Condition: Brand New (Zero Cycles)
• Manufacturer Tier: Standard (Aftermarket XCAP Component)
• Material: Rechargeable Lithium-Ion Polymer
• Compatibility: Engineered specifically for the Apple iPad Pro 11-inch (5th Gen 2024 / 6th Gen 2025).
• Not compatible with: Apple iPad Pro 11-inch (1st/2nd/3rd/4th Gen), iPad Air, or 13-inch iPad Pro models.

Package Contents

• (1) Standard XCAP Factory-Spec Replacement Battery
• (1) Custom-Cut Battery Adhesive Kit
• Note: Tools, heating pads, and isopropyl alcohol are not included.